4. Screw the cartridge into the opening of the appliance. Make sure the cartridge is fully inserted by turning it clockwise until it stops. Replace the appliance cover. One ThermaCell® butane cartridge lasts 8 to 12 hours. If your appliance fails to heat, it may be out of fuel. Check the fuel level by holding the appliance vertically and looking at the fuel gauge on the bottom. You can see the amount of butane in the cartridge. Replace if empty.
|
 |
| 5. Slide the 'On/Off'switch to the 'On' position; the butane gas will begin to flow. |
 |
| 6. Wait approximately 5-10 seconds then depress the start button three to five times in rapid succession. |
 |
7. To verify the appliance is operating, pick it up and check the lens on the end of the appliance. The light at the end of the appliance glows when the appliance is heating. If the light is not glowing, check to make sure the appliance is 'On' and the cartridge is completely screwed into place; then once again depress the start button three to five times in rapid succession. Check to make sure the light is glowing.
|
 |
| 8. Place the appliance on a flat, stable area with the grill side facing up. Do not touch the grill; it will be hot after a couple of minutes. When finished using the appliance, slide the 'On/Off' switch to the 'Off' position, and allow the appliance to cool completely. Appliance is now ready for storage. |
 |
